|
Product Details:
Payment & Shipping Terms:
|
| Name: | Steel Wire Braided Hose | Size: | Accept Customize |
|---|---|---|---|
| Material: | Stainless Steel | Apperance: | Steel Wire Braided Hose |
| Color: | Nutural Color | Application: | Aerospace, Chemical, Mechanical，etc |
| Length: | Accept Customize | Feature: | High Temperature Resistance, Corrosion Resistance,etc |
| High Light: | 20mm 3Mpa Steel Braided Rubber Hose,18.5mm Steel Braided Rubber Hose,3Mpa 20mm steel wire braided hose |
||
High temperature pressure stainless steel pump tube steel wire braided oil and solvent resistant fluorine rubber tube
Description:
FS series special high and low temperature, high pressure hose and assembly.
FS series of special high and low temperature, high pressure hoses and assemblies are mainly used in
aerospace, chemical, mechanical and other special environments to transfer pressure, hydraulic pressure,
and special flow medium power. The inner layer is made of special fluorine rubber and
the outer layer is made of 304 stainless steel wire. It has high temperature resistance, corrosion resistance,
aging resistance, and low-temperature resistance, resistance to most liquids, earthquake resistance,
small bending radius, long service life and other characteristics. The working temperature of FS series: - 55℃ ~ + 225 ℃,
it can reach 250 ℃ in a short time, and the high temperature is 180 ℃. Burst pressure > 3MPa,
normal temperature burst pressure > 10MPa. After the high temperature air aging at 180℃ for 168 hours,
it can keep 3 Mpa without leak, and the pulse life exceed 200000 times.
Typical Properties:
| ID(mm) | OD(mm) | Burst Pressure(Mpa) | Bending Radius min(mm) | Length Change(%) | Tensile Strength(N) | Oil 3# Volume Change at 100℃@168h(%) | Methanol resistance of Volume change at 230℃@168h(%) |
| 9.5 | 16.5 | 31 | 89 | 0.8 | 3550 | 1.6 | 3.5 |
| 11 | 18 | 30 | 90 | 1.1 | 3800 | 1.6 | 3.5 |
| 11 | 18.5 | 45 | 88 | 1.0 | 3600 | 1.6 | 3.5 |
| 13 | 20 | 26 | 102 | 1.3 | 3900 | 1.6 | 3.5 |
| 13 | 20.5 | 30 | 95 | 1.2 | 4450 | 1.6 | 3.5 |
| 15 | 23 | 25 | 113 | 1.5 | 4600 | 1.6 | 3.5 |
| 15 | 23.5 | 32 | 105 | 1.3 | 4900 | 1.6 | 3.5 |
Note: The test method can be referred to GB 3683-2011/ISO 1436:2009,
and the data of different batches will be slightly different.
Other specifications can be customized according to customer requirements.
Technical Index:
| Test Item | Test Method | Result |
| Air impermeability |
Hose assemblies can withstand 3.5Mpa air pressure test for 120 seconds without leakage. |
Passed |
| Anti-ozone | Under the condition of 50± 5ppm, 40 ℃ ± 2℃, there is no crack within 70 h ±2 h. | Passed |
| Water resistance and tensile strength |
At room temperature, after soaking in distilled water for 70h±2h, the pull-out force was not changed compared with that before soaking |
Unchange |
| Corrosion resistance of joints |
No red rust or corrosion traces were found after 24h salt spray test. |
Passed |
| High-temperature resistance | After 180 ℃ x 168 h, pressure tightness test was conducted under 3 Mpa, It does not leak. | Passed |
| Low temperature resistance | After -70±1℃ ×72h±2h, no crack was found on the surface both inside and outside at room temperature. | Passed |
Pictures show:
Contact Person: Lily Luo
Tel: 86-15680650120
